Quick Release/Multi Faster Couplings

Standard MultiFaster

New Holland MultiFaster Special

Front End Loader MultiFaster

Agricultural Series: Push/pull Couplings, rigid mount. ISO7241-A. Connection by pushing the male coupling. Disconnection by pulling the male part. Shut off by poppet valve. Connectable with male part (ISO A) under pressure. Disconnection under pressure only as breakaway. Interchangeability according to ISO 7241-1 part A.

Flat Face Connectability under residual pressure (35MPa-5075PSI) allowed. Disconnect under pressure NOT allowed

Flat Face: Screw-on type. This coupling is resistant to pressure peaks (hammer circuits). Connection by screwing together the two parts. Disconnection by pulling back the female safety sleeve. Shut off by flat valve. Connection under pressure not allowed. Disconnection under pressure not allowed. Interchangeability according to Faster internal Standards. No spillage during connection and Disconnection.

Flat Face: Connectability: both male and female couplings under pressure. Connection by pushing the male coupling. Disconnection by pulling back the female sleeve. Shut off by flat valve. Connection under pressure using 3FFH Series. Disconnection under pressure in 2 steps. Interchangeability according to ISO 16028. No spillage during Connection and Disconnection. Same fixing points as 4BD4FI block.

Coupling: A Series Standard. Interchangeable to ISO 7241-1: Features: Connection by pulling back the sleeve. Disconnection by pulling back the female sleeve. Shut off by poppet valve. Connection under pressure not allowed. Disconnection under pressure not allowed. Interchangeability according to ISO 7241-1 part A.

Coupling Test Point: Features: Connection by pushing the male coupling. Disconnection by pulling back the female sleeve. Shut off by flat face valve. Connection under pressure not allowed. Disconnection under pressure not allowed. Interchangeability according to ISO 15171-1. No spillage during Connection and Disconnection.

Flat Face: Connectability: without pressure. Connection by pushing the male coupling. Disconnection by pulling back the female sleeve. Shut off by flat face valve. Connection under pressure not allowed. Disconnection under pressure not allowed. Interchangeability according to ISO 1628. No spillage during Connection and Disconnection.

Ball Type: Interchangeable to ISO 7241-1 'A' Standards in 1/2". Features: Connection by pulling back the sleeve. Disconnection by pulling back the female sleeve. Shut off by poppet valve. Connection under pressure not allowed. Disconnection under pressure not allowed. Interchangeability according to ISO 7241-1 Part A for 1/2" size only.

Valve Type: Interchangeable to ISO 7241-1 'A' Standards in 1/2". Connection by pulling back the sleeve. Disconnection by pulling back the female sleeve. Shut off by poppet valve. Connection under pressure not allowed. Disconnection under pressure not allowed. Interchangeability according to ISO 7241-1 Part A for 1/2" size only