Transfer, Return & Suction

Recommended For: Petroleum and water-based hydraulic fluids in suction lines or in low pressure return lines. Standards: Meets or exceeds the requirements of SAE 100R4. Meets marine ABS with use of HeatGuard high temp sleeve. Meets Flame resistance acceptance designation MSHA 2G. Tube: Black synthetic rubber specifically designed for resistance to high temperatures Temperature Range: -40°F to 212°F (-55°C to -100°C) continuous service for petroleum and synthetic oils. Maxinmum of +158°F (+70°C) for water, water/oil emulsions and water glycol.

Recommended For: Hydraulic oil lines, anti-freeze solutions or water. Meets or exceeds requirements of SAE 100R3. Tube: Black, synthetic rubber (Nitrile - Type C). Reinforcement: Two fibre braids. Cover: Black oil and abrasion resistant, synthetic rubber (Neoprene - Type A). Temperature Range: For Hydraulic oil lines -40°F to 275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time). Couplings: Super-Crimp series.

Recommended For: Low-pressure hydraulics oil return lines for general purpose water, glycol antifreeze solutions, conveying diesel fuel, gasoline or air. Meets SAE 30R2 performance requirements for both Type 1 and Type 2. Tube: Black, synthetic rubber, oil resistant (Nitrile - Type C). Reinforcement: One fibre braid (-3 to -10). Spiral braid (-12 to -16). Cover: Black synthetic rubber. Oil and abrasion resistant. (Modified Nitrile - Type C). Temperature Range: -40°F to +212°F (-40°C to +100°C). Air to +160°F (+71°C) only. Couplings: Super-Crimp and Gates Mega-Crimp series.