Previous Previous
Next Next

VODL/X1116 - Double Counter-Balance Valve Series

Picture for manufacturer Walvoil
Brand: Walvoil
SKU: VODL1116
UOM: PCS
Steel Body - The 1116 Series is built with zinc plated steel bodies to ensure a top level of strength and durability, these valves can reach a work pressure of 400 bar. N1116 Series - This valve controls a moving load preventing if from moving ahead of the pump and locks the load in any position on U1 and U2. It also provides static overload and thermal expansion protection when used in combination with an open centre spool valve. It permits free flow from D1 to U1 and D2 to U2 and blocks the flow from U1 to D1 and U2 to D2 until a pilot pressure generated at D1 or D2 is sufficient to pilot the U1 or U2 port open. This model is sensitive to back pressure on D1 and D2 in return mode. R1116 Series - As per N1116 but is insensitive to back pressure on D1 or D2 in return mode.
$0.00 inc GST
*
Related products
Picture of SV01

SV01

Monoblock Dual Axis Joystick Hydraulic Pilot Valve with 1 lever and 4 work ports for simultaneous operation of 2 valve sections. This unit can be arranged with several types of handles with or without electric controls. Body in cast iron.
$0.00 inc GST
Picture of DHE07 - 3 Position Solenoid Directional Control Valve

DHE07 - 3 Position Solenoid Directional Control Valve

Spool Type Valves Direct Solenoid Operated Wet Armature Solenoids 4 ways,3 position. Flow rates are based on a 10 bar pressure drop using oil to ISO VG 46 at 50˚C
$0.00 inc GST
Picture of Gear Pump - Group 2 Euro Mount (Taper Shaft) with Threaded Port

Gear Pump - Group 2 Euro Mount (Taper Shaft) with Threaded Port

Hydraulic Gear Pump Polaris Series Group 2 Body: Aluminium Mount : Euro-Mount Shaft: 1 in 8 Taper Ports: Threaded BSPP
$0.00 inc GST
Picture of MVP - Mobile Piston Pump

MVP - Mobile Piston Pump

Variable displacement axial piston pumps. These pumps are the optimal solution for mobile applications. Available with a wide range of control options. Compact design makes them ideally suited for direct mount to engines and gearboxes. The displacements in each frame size are infinitely variable between maximum and minimum via simple screw adjustment. The pump shaft supports full torque transmission in multiple unit configurations. They are available in side (L) and rear (P) ported versions. Addition versions available, please contact your nearest Southcott branch or distributor for the availability of the unit to suit your requirements.
$0.00 inc GST
Picture of SFR3 - Pressure Compensated Flow Regulator Picture of SFR3 - Pressure Compensated Flow Regulator

SFR3 - Pressure Compensated Flow Regulator

Pressure compensated Designed to supply two circuits with a single pump. Maximum pressure - 210 BAR (3000 PSI) Lever is adjustable through 90˚ Port "IN" = Pressure port Port "CF" = Controlled flow Port "EX" = Excess flow (can be used to power a second circuit)
$0.00 inc GST
Picture of VODL/SC/CC - Double Counter-Balance Valve Series Picture of VODL/SC/CC - Double Counter-Balance Valve Series

VODL/SC/CC - Double Counter-Balance Valve Series

VODL/SC/CC Series - Aluminium body - Steel bodied units available on request - add suffix AC This valve controls a moving load in both directions preventing it from moving ahead of the pump and locks the load in any position on U1 and U2. This valve permits free flow from D1 to U1 & D2 to U2 and blocks the flow from U1 to D1 to D2 until a pilot pressure generated at D1 or D2 is sufficient to pilot the U1 or U2 port open. It is utilised in combination with a closed centre spool valve. It is recommended to fit a port relief in this application.
$0.00 inc GST