Accumulators

The diaphragm accumulator consists of a fluid section and a gas section with the diaphragm acting as a gas-proof screen. The fluid section is connected with the hydraulic circuit so that the diaphragm accumulator takes in fluid when pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit. The diaphragm accumulator is regarded as a non-repairable unit. Construction: Welded seam Diaphragm: Alternatives available on request Installation: Mount in any position Working Temperature: -10°C to 80°C Maximum Allowable Pressure Ratio: <6:1 Charging Kit: Available

Bladder accumulators can be used in a wide variety of applications: Energy Storage, Emergency Operation, Leakage Compensation, Volume Compensation, Shock Absorption Construction: Pressure vessel is seamless and manufactured from high tensile steel Bladder: NBR. Alternatives available on request Installation: The preferred mount positon is vertical - fluid port down Accumulator Mounting: Mount by accumulator supports available Working Temperature: -10°C to 80°C Maxium allowable pressure ratio: <4:1 Gas Charging Port: 1/4" BSPP Gas Charging Kit: Available

Accumulator Charging Kit with (SCK-1000R) or without (SCK-1000) regulator . Regulator available separately also.