This unit is a screw in, catridge type, guided ball (-04) or guided poppet (-08 to -16), hydraulic check valve, for use as a blocking or load holding device for high pressure applicatons.
Operations:
Valve allows free flow from port 1 to port 2 and blocks flow from port 2 to port 1 or holding a load.
Specifications:
Operating Pressure: 5,000 PSI (350 Bar)
Flow : 9.5LPM to 228 LPM
Valve Housings:
2,500 PSI (210 Bar) = Aluminum
5,000 PSI (350 Bar) = Steel
This unit is a screw in, catridge type, guided poppet, hydraulic check valve, for use as a blocking or load holding device for high pressure applicatons.
Operations:
Valve allows free flow from port 1 to port 2 and blocks flow from port 2 to port 1 or holding a load.
Specifications:
Operating Pressure: 5,000 PSI (350 Bar)
Flow:38 LPM to 190 LPM
Valve Housings:
2,500 PSI (210 Bar) = Aluminum
5,000 PSI (350 Bar) = Steel
This unit is a screw in, catridge type, guided poppet, hydraulic pilot operated check valve, for use as a blocking or load holding device for high pressure applicatons.
POCX - Is a poppet type external pilot to open with 3:1 pilot ratio.
POCI - Is a poppet type internal pilot to open with 3:1 pilot ratio.
POCV - Is a poppet type internal pilot to open with 3:1 pilot ratio vented on port 3.
Specifications:
Operating Pressure: 5,000 PSI (350 Bar)
POCX Flow: 38 LPM to 136 LPM
POCI Flow: 38 LPM to 136 LPM
POCV Flow: 60LPM to 132LPM
Valve Housings:
2,500 PSI (210 Bar) = Aluminum
5,000 PSI (350 Bar) = Steel
This unit is a direct action, screw in, catridge style, spool type, hydraulic 3 Way, 2-Position. Directional shuttle valve,which may be used on a hydrostatic transmission to direct charge pump oil to heat exchanger or tank.
HOSV - Is a hot oil shuttle valve, spool type springless without relief
HOSR - Is a hot oil shuttle valve, spool type springless with relief
Specifications:
Operating Pressure: 5,000 PSI (350 Bar)
HOSV Flow: 23 LPM to 60 LPM
HOSR Flow: 22.8 LPM
Valve Housings:
2,500 PSI (210 Bar) = Aluminum
5,000 PSI (350 Bar) = Steel
This unit is a screw in, catridge type, 2 ported with external third outlet port, 2 positon, hydraulic shuttle valve.
Operations:
This valve senses the higher of the two input pressures port 1 or port 2 and routes it to the out port.
Specifications:
Operating Pressure: 5,000 PSI (350 Bar)
Flow : 23 LPM
Valve Housings:
2,500 PSI (210 Bar) = Aluminum
5,000 PSI (350 Bar) = Steel
This unit is a screw in, catridge type, 4 ported spool type, 3 positon, spring centred, hydraulic brake release shuttle valve.
Operations:
This valve senses the higher of the two input pressures port 1 or port 4 and routes it to port 2, when pressure on port 1 or port 4 is equal the valve will center and route port 2 to port 3 (tank).
Specifications:
Operating Pressure: 5,000 PSI (350 Bar)
Flow : 19 LPM
Valve Housings:
2,500 PSI (210 Bar) = Aluminum
5,000 PSI (350 Bar) = Steel